BREWSIE Stainless Steel Home Brew Kettle w/Dual Filtration, False Bottom, Thermometer, Ball Valve (8 Gal/32 QT) Review (2026)

What is included

The listing describes the kettle set as including the pot itself, a lid, a false bottom, a bazooka screen, a thermometer, a ball valve, an inner connector and the hardware to assemble them, so a brewer gets the filtration and draining fittings in one purchase rather than sourcing a false bottom or valve separately. The maker lists the kettle at 12.5 inches wide by 17.5 inches tall and about 14 pounds empty, with stamped volume markings on the side for tracking boil volume without a separate measuring tool during a brew day. The maker describes the kettle as fully polished stainless steel, and the lid can hang on the side handle so it has a place to sit off the counter while the kettle is open.

Dual filtration for draining

Having both a false bottom and a bazooka screen gives two layers of filtration between the wort and the ball valve, which matters most for extract brewers steeping specialty grains in a bag or small batch all grain brewers doing brew in a bag, since either method can leave loose grain particles or hop matter that would otherwise clog a plain valve. The false bottom sits above the kettle floor, letting wort drain from underneath the grain bed rather than pulling debris straight into the valve opening as the kettle empties.

Built-in thermometer

A thermometer mounted in the kettle wall lets a brewer read mash or steep temperature without dipping a separate probe in and out, which keeps the lid closed more of the time and helps hold steady temperature during a mash or hot steep. This is a convenience rather than a lab-grade instrument, so brewers who want to fine-tune a precise mash schedule may still want to cross-check readings with a separate calibrated thermometer occasionally, but for extract and simple BIAB brewing it removes a step from the process and speeds up temperature checks.

Capacity limits

At 8 gallons, this kettle comfortably handles a full boil for a standard five gallon batch along with the water and grain volume that extract or small BIAB brewing needs. Full-volume all grain brewing, where all the mash water and sparge water for a five gallon batch sit in one kettle with several pounds of grain, can push closer to or past this kettle's practical capacity, especially for high gravity beers with large grain bills, so all grain brewers planning bigger batches should compare this size against their expected mash and boil volume before buying it. BREWSIE also sells this same design in larger sizes, which gives a clear upgrade path if a brewer outgrows the 8 gallon version without switching to a different kettle brand.

Who should buy it

This kettle fits extract brewers and BIAB brewers making standard five gallon batches who want filtration and a valve built in from the start rather than adding aftermarket fittings to a plain pot. It is a tighter fit for all grain brewers doing full-volume mashes with big grain bills, who may outgrow 8 gallons and want to look at BREWSIE's larger sizes instead. For the extract and small batch BIAB crowd, the combination of dual filtration, a built-in thermometer and stamped volume markings covers most of what a kettle needs to do on brew day.

Frequently asked questions